Est. 1964

Damon Company of Salem, Inc.

2117 Salem Industrial Drive

Salem, VA 24153

Toll Free: (877) 389-8609

Phone: (540) 389-8609

FAX: (540) 389-8556

Maker of metal identification plates and tags for an infinite variety of industrial needs

Introduction

Machine and Facilities Listing 2016

Buildings
Approximately 29,000 Sq. Ft. Working Floor Space, with 3,000 Sq. Ft. Office Space

Locations
2117 Salem Industrial Dr
Salem, VA 24153-3145
Established 1964

Laser Markers
1 – Control Laser 90 Watt YAG Laser with Rotary Table and 12” Lens.
1 – TRUMPF TruMark Station 5000, 35 Watt Fiber Laser with Rotary Indexer & 7” Lens.

E.D.M. (Electrical Discharge Machine)
1 – 2015 VZ500L Sodick Wire EDM
X-Axis Travel = 19.7”; Y-Axis Travel = 13.8”; Z-Axis Travel = 9.8”; Taper Capabilities; Wire Diameter - .004” - .010”.

Turning Centers
1 – Doosan PUMA TT1800SY Turning Center with 48 Live Tools, Sub-spindle and Twin Turrets with Y-Axis, Bar Feeder and Chip Conveyor.
1 – Doosan PUMA 2600Y Turning Center with 12 Live Tools, 3” OD Bar Capacity, and Chip Conveyor.
1 – Daewoo PUMA 230 MS Turning Center with Live Tooling, Sub-spindle, 2.125” OD Bar Capacity, Bar Feeder, and Chip Conveyor.
1 – Daewoo Lynx 200L Turning Center with Bar Feeder and Chip Conveyor.
1 – Daewoo PUMA 200 MS Turning Center with Live Tooling, Sub-spindle, Bar Feeder, and Chip Conveyor.
1 – Swiss-Style CNC Turning Center, Citizen-Cincom F12 II Series 4; ½” OD Bar Capacity, and 20 Index Positions.
1 – 2015 Swiss-Style Citizen-Cincom K16EVII, 5/8” OD Bar Capacity, 20 Tools, 7 Axes, and 12’ Bar Feeder.
1 – Doosan Lynx 220LM with 12 Live Tools, 2” OD Bar Capacity and Bar Feeder.
1 – KSI 20 Swiss-Style CNC with .75” OD Bar Capacity and Bar Feeder.
1 – KSI 32 Swiss-Style CNC with 1.25” OD Bar Capacity and Bar Feeder.

Engine Lathes
1 – Sharp 1760K Gap Lathe; 12” X 40”, 20” Gap.
1 – Sharp 1640 Gap Lathe; 16” X 40”
1 – Kingston HD 2690 Gap Lathe; 26” X 90”

Turret Lathes
2 – Hardinge Model HC, Precision Chucker.

Vertical Mills
1 – Doosan MV 3016L CNC 4 Axis Milling Machine with Indexer.
1 – Daewoo DMV 3016 Vertical CNC Milling Center.
1 – Daewoo DMV-500 Vertical CNC Milling Center.
1 – Daewoo Mynx-540 Vertical CNC Milling Center with Indexer.
1 – Victor CNC Machining Center.
2 – CNC Series II Bridgeports, 4-Axis.
4 – Series I Bridgeports with Digital Readout.
2 – Sharp Series I Vertical Mills, with Digital Readout.
1 – Supermax Series I Vertical Mill.
1 – Alliant CNC Vertical Mill.

Drilling Machines
1 – Burgmaster Bench Model Drilling Machine.
1 – Small Single Spindle Clausing Drilling Machine.
1 – Small Single Spindle Rockwell  Drilling Machine.
1 – Small Single Spindle Walker Turner Drilling Machine.

Surface Grinders
1 – 10” X 20” Kent Surface Grinder with Hydraulic Feed.
1 – 6” X 12” Harig Surface Grinder.
2 – 6” X 12” Mitsui (200 MH) Precision Hand Grinders
      with Micro Dials and Digital Readout.
1 – 6” X 12” Mitsui Precision Hand Grinder.

Centerless Grinder
1 – Dedtru Grinding Unit, Model C-6; Diameters 0.0320
   – 3.7500 with Tolerances of 0.0001 Capability.

Punch Presses
1 – 50 Ton Bliss #21 ½ - OBI with Coil Feed.
1 – Henry & Wright Frame Press with Minster Combination.
1 – 35 Ton Bliss #20C – OBI with Coil Feed.
1 – 35 Ton V&O – OBI with Coil Feed.
1 – 32 Ton Minster No. 4 with Coil Feed.
2 – 25 Ton V&O – OBI with Coil Feed.
2 – 25 Ton Alva Allen – OBI with Coil Feed.
1 – 20 Ton Hahnemann – OBI with Coil Feed.
1 – 20 Ton Press Rite #2 – OBI with Coil Feed.
1 – 16 Ton Minster No. 2 Inclined with Coil Feed.
2 – 16 Ton Minster B1-16 with Coil Feed.
1 – 15 Ton Hahnemann – OBI with Coil Feed.
4 – 5 Ton Jordan - with Coil Feed.
1 – 5 Ton Bliss #8.
2 – 5 Ton Bliss #018.
1 – 5 Ton Benchmaster.
3 – 2.5 Ton Press Rite.

Finishing Equipment
2 – Vibratory Deburring Machine, BurrBuster.
1 – Vibratory Deburring Machine, Giant.

Inspection Equipment
Brown and Sharpe CMM.
Gauge Pins – 3 Sets.
Granite Blocks; Surface Sizes – 24” X 24” and 16” X 16”.
Bausch & Lomb Optical Comparator with Digital Readout.
Optical Comparator – 10”.
Starrett HGC Model 2018-16 CMM with Apogee Software.
Sets of Gauge Blocks.
Set of Height Gauges.
Rockwell Hardness Tester.
Ring Gauges.
Thread Gauges.
Miscellaneous Micrometers, Calipers, and Indicators.

Saws
1 – Victor Auto Cut Horizontal Band Saw.
1 – DoALL Vertical Band Saw.
1 – Wells Metal Band Saw.

Welding Equipment
Power Tran 250 AC Arc Welder.
Miller MIG Welder, Model 200.
Lincoln TIG Welder AC-DC-300.
Oxy-Acetylene.
Portable Spot Welder.

Miscellaneous
1 – CIM Embosser, Model 1700AES.
4 – Matica Embossers, Model C400.
1 – CIM Embosser, Model M3000.
1 – System Automation Eight Station Silk Screen Machine.
4 – Haas Programmable Indexers.
1 – Shear #18-36 Famco.
2 – Glass Bead Blasters.
1 – Siva Disti D-15 (Solvent Recovery System).
1 – Tennsmith Shear, up to 52” and 12 gauge.

 

® Damon Company, Salem, Va 2016  | website development: www.hazlegroveagency.com